Re: Wishlist RPi [1.0.8]

stylesuxx Wrote:
-------------------------------------------------------
> Matthias already mentioned it in the channel, we
> need automated builds, should not be too hard to
> accomplish. But what I also want would be an
> automated testing rig:
>
> Image is build and dumped to an SD card, after
> that the SD card reader is deactivated and the
> data lines are re routed to the RPI, RPI is then
> powered on. After bootup is done, a Phone connects
> to the RPi and executes its test Harness. This
> should be easily doable with an Arduino or
> similar.
>
> Is this over engineered?

I'm not sure if it's not too much. ;) But automated builds would be
awesome!
But in regards to your suggested test rig, what do you mean with data lines?
As I read it, you think of one SD card reader that is connected to the
building system and to the RPi, but only one connection would active at a
time?!