Matthias already mentioned it in the channel, we need automated builds, should not be too hard to accomplish. But what I also want would be an automated testing rig:
Image is build and dumped to an SD card, after that the SD card reader is deactivated and the data lines are re routed to the RPI, RPI is then powered on. After bootup is done, a Phone connects to the RPi and executes its test Harness. This should be easily doable with an Arduino or similar.
Is this over engineered?
Image is build and dumped to an SD card, after that the SD card reader is deactivated and the data lines are re routed to the RPI, RPI is then powered on. After bootup is done, a Phone connects to the RPi and executes its test Harness. This should be easily doable with an Arduino or similar.
Is this over engineered?