Re: Enable Internet Connection after manual installing the piratebox
Sorry, maybe I have misunderstood the question. The Raspberry Pi broadcasts both WiFi signals or there is a "school router" that gives you internet? Do you want to access the Piratebox from the school...
View ArticleRe: Enable Internet Connection after manual installing the piratebox
Sorry that i've not good explained my situation. Yes there is a school router which provides the second wifi signal and which has the possibility to connect also an ethernet cable :) I want to connect...
View ArticleRaspberry piratebox 3 boot issues
I did the manual installation on a raspberry pi 3 and it works, but after reboot lighttpd does something and I have to shut it and the piratebox down from the terminal, then start the piratebox again....
View ArticleRe: Enable Internet Connection after manual installing the piratebox
It is tricky. By default PirateBox redirects all traffic to a single site.You would need to split traffic and send some to the internet and e.g. piratebox.lan to the piratebox. At this point you are...
View ArticleRe: Enable Internet Connection after manual installing the piratebox
Okay i understand. Thank you for your help :)
View ArticleUnable to connect to piratebox AP
Following the steps at : https://piratebox.cc/raspberry_pi:diy:manual I setup and installed the piratebox software. Everything seemed to work but if I try to connect to the AP my phone just sits on...
View ArticleRe: Unable to connect to piratebox AP
you need to be connected to the piratebox wifi AP in order to ssh in @ 192.168.77.1
View ArticleRe: Unable to connect to piratebox AP
I can't connect to the AP so I can't ssh in like that. this issue is related to using Raspbian Jessie Lite instead of Weezy.
View ArticleRe: Piratebox not starting
You can find out the UUID using the blkid command sudo blkid This results in a list like this /dev/sda1: UUID="1123a4b5-9a23-4645-9101-7a43059cfe8a" TYPE="ext4" PARTUUID="6fedd353-01" Use the UUID...
View ArticleRe: station_cnt not work ?
Hi, no worries about the long reply time. Mh, I am wondering about the reply with "0". Is there a change that you change the language of your command line? That would result in a non-hit. Can you post...
View ArticleRe: Raspberry pi 3 movie streaming
The CPU shouldnt be here the limiting factor. Like Nagren said, USB performance could be weak. I want to throw another suggestion in: Your wifi channel is crowded and you get a poor performance...
View ArticleRe: Help! RPI3 with TP-Link TL-WN722N
Hi, thanks for posting the different outputs. Depending on the age of the WN722N you can run into hostap/driver issues. I think we have another thread about this... I still need to figure a way out of...
View ArticleRe: Piratebox 1.0.7: pacman -Syu broke ability to allocate IP addresses:...
Hi, thank you for providing that much of data, that helped alot. I am not quite sure what your box broke, but the fix for this Quote Sep 06 10:33:10 alarmpi piratebox_alt[263]: dnsmasq: failed to...
View ArticleRe: Raspberry piratebox 3 boot issues
Do you get some error messages? Can you post those? Many thanks, best regards Matthias
View ArticleRe: Unable to connect to piratebox AP
On Debian, the most packages enable&start themself during startup. Especially the dnsmasq is causing issues then. Can you try to /etc/init.d/dnsmasq stop And then to restart the piratebox scripts....
View ArticleRe: PirateBox 1.0.7 - RPi / RPi2 / RPi3 / RPi Zero
The image is archlinux based. The package manager is named pacman
View ArticleRe: Unable to connect to piratebox AP
I'll try again stopping dnsmasq and see if that works. if it doesnt how do I narrow it down? I figured there would be guides on how to build a raspbian jessie piratebox but couldnt find much.
View ArticleRe: Raspbian Jessie Lite Piratebox
I was able to connect after running sudo /etc/init.d/dnsmasq stop sudo /etc/init.d/piratebox stop sudo /etc/init.d/piratebox start When I tried to reset the piratebox I got an error near the end...
View ArticleRe: Raspbian Jessie Lite Piratebox
The piratebox half works now. after stopping dnsmasq and lighttpd then using stop/start to restart the scripts I can connect and connect to the webserver. if i try to browse the uploaded files it...
View ArticleRe: RPI3 and WIFI Config open question
Bro I love what your doing. I want the pibox as server then plug into a slave router is that possible?
View Article