Re: Piratebox not starting
Quoteinstall [alarm@alarmpi ~]$ passwd Changing password for alarm. (current) UNIX password: Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully [alarm@alarmpi ~]$...
View ArticleRe: Piratebox not starting
I also have a "TP-LINK TL-WN722N Wireless N150" which I can try to setup with the initial install, but I believe it is something bigger than the wlan0. When I connect the external harddrive I am not...
View ArticleRe: Piratebox not starting
I FIXED IT!!! I needed to setup the UUID for the external drive. I used "UUID=######### /mnt/usbdrive ext4 defaults,errors=remount-ro 0 1" in fstab and now it reboots. Thank you for taking the time to...
View ArticleRe: RPi3 box troubleshooting
I would just go with the onboard wifi the RP3 has already as it works very well. Some of the chips inside USB wfi sticks are very cheap and nasty. They work fine to give you an network connection but...
View ArticleRe: RPi3 box troubleshooting
The only reason I went for a USB stick wifi adapter was to get better range. I have a rpi 2 as well and an Edimax EW-7811Un plug-in adapter. Would I get better range on the rpi 3 with built in wifi or...
View ArticleHow do i connect to my piratebox using ssh
have a raspberrypi B already runnig piratebox works great but cant seem to log in via ssh on windows or ubuntu terminal.
View ArticleSetting up Pi Zero
Hiya Guys, Sorry if this has been asked before but a quick Google search didn't reveal it for me. I'm wanting a PirateBox setup on my Pi Zero however the official instructions here tell me I need to...
View ArticleRe: Setting up Pi Zero
There are scripts in place that will automagically detect a SUPPORTED wifi device, install its driver and configuration and start broadcasting the SSID.
View ArticleRe: Raspberry Pi 3 Success
I am using Raspberry Pi 3 with Piratebox and would like to load Kiwix on, does some one any experience with it?
View ArticleRun Arch Raspberry Pi Piratebox over both eth0 and wlan
Is it possible for ethernet and wireless to be going at the same time serving Piratebox content? The directions that I've found for eth0 enabling are for Rasbian Manual DIY that enables LAN but...
View ArticleRe: Run Arch Raspberry Pi Piratebox over both eth0 and wlan
Setting the bridge up is pretty difficult. I prepared the configuration files for LibraryBox but never released it. Maybe you should make a backup of the SDCard before starting! Technically, you need...
View ArticleRe: Run Arch Raspberry Pi Piratebox over both eth0 and wlan
Wow! Thanks for taking the time to help me with this. I'll follow your directions it in the next week and I'll let you know how it turns out. One quick question, why enable IP6 in the ipv6.conf?
View ArticleRe: Run Arch Raspberry Pi Piratebox over both eth0 and wlan
You are right, the IPv6 enable was a mistake. Please excuse that. I changed the corresponding part at my Post above. If that works out, I'll copy that to the wiki. Matthias
View ArticleRe: Changing USB drives?
Any other solutions here? I'm having the same problem. If I put in the new stick, and put a monitor on the box, you can see the boot lines. It hangs at "calling CRDA" waiting on disk to start. Then...
View ArticleRe: PirateBox 1.0.7 - RPi / RPi2 / RPi3 / RPi Zero
Sir/Ma'am after i put piratebox image on sd card what should i do next? what's the username and password of a raspberrypi except the default username and password. what should i input? i've stack on...
View ArticleFiles page redirect after changing to usb
Hi, I am new to Piratebox, And First I must say how awsome it is! But I have trouble with setting the media location to my usb stick. I followed this (https://www.piratebox.cc/raspberry_pi:mods) and...
View ArticleRe: Files page redirect after changing to usb
Turns out that everything was working but it was a problem with my brouwser. It was showing a old version of the html. Catch probely. Stupid thing, sorry for this topic.
View ArticleSSH / FileZilla / Folder Permission
Hello, i'am discovering the PirateBox solution with my RaspBerryPi3 and OSX Everything is turning well, but i would love to customize it with html and css. So for that i try an SSH connection and...
View Article