Re: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
It is working fine for me.
View ArticleAP not visible?
Hi, I've just finished an installation on my Raspberry Pi model B. I've used the Arch Linux image from the website, installed to an SD card. Everything is working fine except I can't see the wireless...
View ArticleRe: AP not visible?
Sorry, should have struggled on a bit more and paid more attention! The clue was in the dmesg output: [ 13.415241] usbcore: registered new interface driver r8188eu This USB stick doesn't fully work...
View ArticleRe: AP not visible?
..and you answered your own question before I could get to you. Also, commenting out the driver would have worked too. At least it did for me. #driver=nl80211
View ArticleRaspberry Pi pre releas testing
Hello community, I was talking to Matthias @32c3 and suggested I could take the RPI part off his hands. Yesterday I have been working on improving the build scripts and I am at a point where it is...
View ArticleRe: RaspberryPI 1 based image for testing
C'mon guys, testing is fun and quality assurance for the whole community. I am trying to get hold of an RPi2 and will add myself as 2nd tester for RPi1 and RPi2 if I can get hold of it. Still for the...
View ArticleRe: RaspberryPI 1 based image for testing
I have a Pi Zero next to my computer with a console cable attached ready for testing. PM me? I also have a Pi B(not-a-plus) My Pi 2 is sort of my main NAS server and cant really be used for testing at...
View ArticleRe: RaspberryPI 1 based image for testing
This is just a checklist for future tests. Since I was updating build scripts and Stuff. Before we do ne next release we will do a testing round, so if you could join us with the zero, that would be...
View ArticleRe: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
Problems with the magnet link = 'magnet:magnet:' one 'magnet:' is enough; someone could please correct this on the link(s) I'm having issues with the image though. The file downloaded ends in .img.zip...
View ArticleRe: Raspberry Pi pre releas testing
I will join with the zero. Edit: I had to boot the image on my PiB to install wpa_supplicant. pacman -U wpa_supplicant # nano /etc/wpa_supplicant.conf network={ ssid="My SSID" psk="mypasskey" } DONE...
View ArticleRe: Raspberry Pi pre releas testing
I had to do this every boot to get things to work. I'm not sure why # pkill lighttpd # pkill hostapd # pkill dnsmasq # systemctl restart piratebox And the Checklist so far. ## Checklist for Pi Zero *...
View ArticleRe: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
Hi, I'm sorry for that ongoing magnet-link trouble I fixed it several times, it seems there is a bug in dokuwiki when you re-edit the page, the link is malformed, so it ends up with two magnets after...
View ArticleRe: Raspberry Pi pre releas testing
Can you check if the default units for dnsmasq & hostap are disabled? That may cause the problem. The steps aren't redundant, they are for double check, if after a reboot everything is still...
View ArticleRe: Raspberry Pi pre release testing
Alright thank you for the feedback TheExpertNoob. I added wpa_supplicant to the dependencies and it is now installed when the image is built. I was wondering if we should add a...
View ArticleRe: Raspberry Pi pre release testing
Matthias, how do I go about checking/disabling the default units? Edit: easy as pie, derp. I assumed piratebox used the default units but used/implemented its own config. I'm sort of new to Arch,...
View ArticleRe: Raspberry Pi pre release testing
This is on a failed piratebox startup from no power: # systemctl status hostapd * hostapd.service - Hostapd IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator Loaded: loaded...
View ArticleRe: Raspberry Pi pre release testing
TheExpertNoob Wrote: ------------------------------------------------------- > I don't know if putting it on the boot partition > would be easier for the end user to edit it, mount >...
View ArticleRe: Raspberry Pi pre release testing
Github link is dead. Someone changed the branch name. Also I can't sync my clone anymore. N.P., I can re-download.
View ArticleRe: Raspberry Pi pre release testing
Another random question.. What is the proper dd count for this image? Im using: sudo dd if=/dev/sdb bs=2048 count=1048576 | pv | sudo dd of=testpiratebox-rpi.img bs=2048 count=1048576 for backup...
View Article