Re: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
Hay I am not able to boot raspberry pi after writing the image
View ArticlePi2, can connect but nothing happens.
So i have my pi2, i got the edimax wifi dongle to work (i can connect to the pi), but when i try to access the pirate box via the browser, nothing happens, i just get the cant find page error like its...
View ArticleRe: USB FAT-Storage
Yes it worked great!! Then I decided to use a smaller - physical size - USB drive. Formatted it, copied the 2 folders, inserted, rebooted and now my Forum link on the home page takes me to a list of...
View ArticleRe: USB FAT-Storage
So after you initialize the USB storage drive, you restart and login with; [http://piratebox.lan/board/kareha.pl] as indicated in the initial set up instructions... Now we're back to a working Pirate...
View ArticlePi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
pi@mypi ~ $ sudo /etc/init.d/piratebox start [....] Starting script piratebox : Generating hosts file .... Generating dnsmasq.conf ..... Generating Environment-config for lighttpd ..... Empty tmp...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
I run my piratebox on a TL-MR3040 so I can't say for certain on a Pi, but it looks like you have another service running that's listening on port 80: [....] Starting lighttpd...:2015-10-30 21:49:13:...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
So i found using $netstat -tulpn | grep :80 shows this "tcp 0 0.0.0.0:80 0.0.0.0:* LISTEN 2616/lighttpd" so this may be a problem right? isnt "lighttpd" a service I NEED running to use Piratebox? OR...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Check if lighttpd is currently running with: $ service lighttpd status If it's running, use: $ sudo service lighttpd stop Afte you've confirmed lighttpd is stopped, try to start piratebox again: $...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
UGH this makes no sense to me, here is what I got for outputs; pi@mypi ~ $ service lighttpd status [FAIL] lighttpd is not running ... failed! pi@mypi ~ $ sudo /etc/init.d/piratebox start [....]...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Try $ sudo kill -9 2616 to kill the lighttpd process and run again. If your lighthttpd is still giving you issues check out the lighttpd log to see if you can get more descriptive information on why...
View ArticleRe: WiFi AP with Edimax EW-7811Un
I did what you guys mentioned all the codes , and in the end wlan0 : link is not ready , I dont know what I can do more
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
right on brother, you got that part fixed but im still getting this error recurring on attepts to start up the box, pi@mypi ~ $ sudo /etc/init.d/piratebox start [....] Starting script piratebox :...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
SWEET that fixes 1 part of it now its just something with the dnsmasq pi@mypi ~ $ sudo /etc/init.d/piratebox start [....] Starting script piratebox : Generating hosts file .... Generating dnsmasq.conf...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
So as far as i can see is "dnsmasq" is addressed in /opt/piratebox/conf/piratebox.conf file. Should it be configured different from default? this pi , omfg.... anyhow thanks let me know, -SnapCount
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
I wouldn't think that you'd have to change any conf defaults to start, is dnsmasq running already? Try netstat -tulpn again to see if dnsmasq is listening on a port. If it is, use $ sudo...
View ArticleRe: Pi2, can connect but nothing happens.
Can you try to find out if your computer got an IP address from the PirateBox?
View ArticleRe: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
Do you have raspberry Pi 1 or 2? did you extract the image file before writing it?
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Well i took your other advice as nothing is working out well. I reinstalled it (piratebox) with a "Wifi Compatible" Edimax dongle, as prior I was using a generic one which still works but requires...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
OK figured out how to log in ssh, simply ssh root@mypi then it asks for root, now what in the fu#@ is it? is it the password i set at the start during the initial raspi-config panal setup stage? which...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Per [piratebox.cc] password is root. Default pi password is raspberry, have you tried that? Not really sure about that one, you'd have to review your docs or check the forums. Like I said, I run my...
View Article