Re: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Try $ sudo kill -9 2616 to kill the lighttpd process and run again. If your lighthttpd is still giving you issues check out the lighttpd log to see if you can get more descriptive information on why...
View ArticleRe: WiFi AP with Edimax EW-7811Un
I did what you guys mentioned all the codes , and in the end wlan0 : link is not ready , I dont know what I can do more
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
right on brother, you got that part fixed but im still getting this error recurring on attepts to start up the box, pi@mypi ~ $ sudo /etc/init.d/piratebox start [....] Starting script piratebox :...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
SWEET that fixes 1 part of it now its just something with the dnsmasq pi@mypi ~ $ sudo /etc/init.d/piratebox start [....] Starting script piratebox : Generating hosts file .... Generating dnsmasq.conf...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
So as far as i can see is "dnsmasq" is addressed in /opt/piratebox/conf/piratebox.conf file. Should it be configured different from default? this pi , omfg.... anyhow thanks let me know, -SnapCount
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
I wouldn't think that you'd have to change any conf defaults to start, is dnsmasq running already? Try netstat -tulpn again to see if dnsmasq is listening on a port. If it is, use $ sudo...
View ArticleRe: Pi2, can connect but nothing happens.
Can you try to find out if your computer got an IP address from the PirateBox?
View ArticleRe: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
Do you have raspberry Pi 1 or 2? did you extract the image file before writing it?
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Well i took your other advice as nothing is working out well. I reinstalled it (piratebox) with a "Wifi Compatible" Edimax dongle, as prior I was using a generic one which still works but requires...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
OK figured out how to log in ssh, simply ssh root@mypi then it asks for root, now what in the fu#@ is it? is it the password i set at the start during the initial raspi-config panal setup stage? which...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
Per [piratebox.cc] password is root. Default pi password is raspberry, have you tried that? Not really sure about that one, you'd have to review your docs or check the forums. Like I said, I run my...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
It seems on archlinux they changed the default password combination. So if you built your RPi image from scratch with a newer archlinux image: Quote Use the serial console or SSH to the IP address...
View ArticleRe: Pi(rate)Box [ERROR ONLY ON THE LAST STEP OF INSTALL!!!] - 'Im cursed'
@ ilgrande Yes i have tried the default root password for user "pi" login: "raspberry" to still be locked out... @ Mathias I installed it on Raspbian Weezy as per the instructions:...
View ArticleRe: Pi2, can connect but nothing happens.
so i can connect, but it doesnt seem to be giving me an ip address.
View ArticleRe: Pi2, can connect but nothing happens.
Can you verify if the hostap prepares a wlan0 device or something else?
View ArticleFor Dummies Guide? :S
First off, obligatory Hello World! Now, to the issue at hand. I'm trying to run a Raspberry Pi(rate) box with a Kootek 802.11N adapter (note: it may actually be IIN, the packaging is...weird.) Can...
View ArticleRe: For Dummies Guide? :S
... I think I found the solution. I also feel stupid for not seeing it sooner. [*] Get the disc image off of the Raspberry Pi page (found under HowTos) [*] Flash it onto the SD card [*] Follow the...
View ArticleRe: Installing PHP on Raspberry Pi(rate)Box
Yay, thanks for the quick help, I'm gonna try it later this evening. (tu)
View ArticleRe: New image avaliable for Raspberry Pi 1 a/b/b+ ~ PirateBox 1.0.2
Hi guys, transmission is reporting the magnet link on the download page is corrupt. the link in this thread works fine. cheers Matt
View Article