Hey, I got the TL-WN725N to work after following steps 5/6 from these instructions:
[www.raspberrypi.org]
Rebuilding the hostapd binary and replacing the one on the rpi *after* installing it the usual way, then changing the specified driver (but not the other suggested options) in step 6, worked just fine.
Good luck!
[www.raspberrypi.org]
Rebuilding the hostapd binary and replacing the one on the rpi *after* installing it the usual way, then changing the specified driver (but not the other suggested options) in step 6, worked just fine.
Good luck!