I got the TL-WN725N USB-stub to work, with a few edits.
From these instructions, steps 5 and 6 only:
[www.raspberrypi.org]
..rebuild the binary for hostapd, then change the "driver=" line in /opt/piratebox/conf/hostapd.conf to the specified driver.
Works fine after that; main challenge I'm facing now is changing to USB storage to avoid r/w wear and storage limits on the sd card..
From these instructions, steps 5 and 6 only:
[www.raspberrypi.org]
..rebuild the binary for hostapd, then change the "driver=" line in /opt/piratebox/conf/hostapd.conf to the specified driver.
Works fine after that; main challenge I'm facing now is changing to USB storage to avoid r/w wear and storage limits on the sd card..