Silly question, is it still changed after the reboot?
↧
Re: Rasperry WiFi wont work after restart and won't find any external HDD’s or Flash Drives
↧
Re: Rasperry WiFi wont work after restart and won't find any external HDD’s or Flash Drives
Hello,
After modifying /opt/piratebox/conf/piratebox.conf to set PROBE_INTERFACE="yes", and then rebooting, the file is still modified following the reboot. Is this what you asked?
Regards
Peter
After modifying /opt/piratebox/conf/piratebox.conf to set PROBE_INTERFACE="yes", and then rebooting, the file is still modified following the reboot. Is this what you asked?
Regards
Peter
↧
↧
Re: Setup Problems
Matthias Wrote:
-------------------------------------------------------
> did you change something in the configuration?
> Can you reach other services on the box, like http
> ?
Nothing has been changed. I wrote the image to the card and booted. Once booted I enabled and started the Piratebox service (using a tv, as LAN doesn't start up) which then made the wifi AP visible and I can access the Http server and up/download as normal but nothing else.
I'll do some more investigation when I get a free moment (I'm fairly competent with Linux).
-------------------------------------------------------
> did you change something in the configuration?
> Can you reach other services on the box, like http
> ?
Nothing has been changed. I wrote the image to the card and booted. Once booted I enabled and started the Piratebox service (using a tv, as LAN doesn't start up) which then made the wifi AP visible and I can access the Http server and up/download as normal but nothing else.
I'll do some more investigation when I get a free moment (I'm fairly competent with Linux).
↧
Re: [Urgent]How to change PirateBox Shared Folder to USB by default on Raspberry Pi
Hi VantagE,
I would suggest you some primary steps.
first mount the USB Storage or install any automunting tool,
make a Shared folder in your USB drive,
then create a link by the following command,
Note:- Please check the mount path of your USB drive.
I would suggest you some primary steps.
first mount the USB Storage or install any automunting tool,
make a Shared folder in your USB drive,
then create a link by the following command,
sudo ln -s /media/usb0/Shared/ /opt/piratebox/www/Shared
Note:- Please check the mount path of your USB drive.
↧
Re: RaspberryPI USB wifi compatibility list
I have my RaspberryPi PirateBox running for quite a while now with a TP-Link TL-WN822N,
didn't even need adjustments - just plugged in and worked!
didn't even need adjustments - just plugged in and worked!
↧
↧
Alfa AWUS036NHR v2 - WLAN doesn't show up after successful piratebox start/enable
Hello everyone!
I switched from my TP-Link TL-WN822N to the Alfa AWUS036NHR v2 wireless adapter, to increase my range but.
So I formated the sd card and created it again with the image, booted, connected and start/enabled the piratebox successfully.
But after the reboot the wlan doesn't show up.. any ideas how to fix that?
regards,
apoc
I switched from my TP-Link TL-WN822N to the Alfa AWUS036NHR v2 wireless adapter, to increase my range but.
So I formated the sd card and created it again with the image, booted, connected and start/enabled the piratebox successfully.
But after the reboot the wlan doesn't show up.. any ideas how to fix that?
regards,
apoc
↧
Re: Rasperry WiFi wont work after restart and won't find any external HDD’s or Flash Drives
Hi,
yes. Sorry for the dump question, but I wanted to make sure, that the saved change lasts a reboot.
Mh. Well, if it really works when you login and start in manually, I suggest to increase
I'm wondering what else could be the issue.
About the USB harddisk, there is no auto-recognition for usb devices. You have to setup it manually.
Matthias
yes. Sorry for the dump question, but I wanted to make sure, that the saved change lasts a reboot.
Mh. Well, if it really works when you login and start in manually, I suggest to increase
PROBE_TIME=10to 60 seconds.
I'm wondering what else could be the issue.
About the USB harddisk, there is no auto-recognition for usb devices. You have to setup it manually.
Matthias
↧
Re: RaspberryPI USB wifi compatibility list
Thanks for the feedback. I added it to the compatibility list.
↧
Re: Alfa AWUS036NHR v2 - WLAN doesn't show up after successful piratebox start/enable
↧
↧
Re: Rasperry WiFi wont work after restart and won't find any external HDD’s or Flash Drives
Hello,
In experimenting, I tried setting the probe time to 100, sadly without making any difference. Reading the forum though, it would seem that others also have a similar problem.
Regards
Peter
In experimenting, I tried setting the probe time to 100, sadly without making any difference. Reading the forum though, it would seem that others also have a similar problem.
Regards
Peter
↧
Re: Alfa AWUS036NHR v2 - WLAN doesn't show up after successful piratebox start/enable
Seems like this worked perfectly!
thank you very much!
EDIT:
I have to correct myself.. the hotspot showed up for a few seconds then disappeared.. now its just the same as before.. after plugging in my pi, it does nothing.
thank you very much!
EDIT:
I have to correct myself.. the hotspot showed up for a few seconds then disappeared.. now its just the same as before.. after plugging in my pi, it does nothing.
↧
Solving the bootup issue
Hi,
I'm trying to summarize the problem solution for the startup-issue here. I'm sorry for those problems.
First option, that works in some cases: [piratebox.cc] (Enabling Device PROBE)
Sometimes it can help to increase the PROBE_TIME in piratebox.conf (If you increased, please report your value back).
As on my box it is working, and I can only check commands on my arch notebook.. so we need to try a few things.
Next steps:
Can you please post the output of
Matthias
I'm trying to summarize the problem solution for the startup-issue here. I'm sorry for those problems.
First option, that works in some cases: [piratebox.cc] (Enabling Device PROBE)
Sometimes it can help to increase the PROBE_TIME in piratebox.conf (If you increased, please report your value back).
As on my box it is working, and I can only check commands on my arch notebook.. so we need to try a few things.
Next steps:
Can you please post the output of
systemctl status piratebox?
Matthias
↧
Re: Rasperry WiFi wont work after restart and won't find any external HDD’s or Flash Drives
Hi Peter,
yes, I'm becoming mad because of this issue.
I'm trying to summarize the problem solution now... please post, and follow this thread: [forum.piratebox.cc]
Matthias
yes, I'm becoming mad because of this issue.
I'm trying to summarize the problem solution now... please post, and follow this thread: [forum.piratebox.cc]
Matthias
↧
↧
Re: Alfa AWUS036NHR v2 - WLAN doesn't show up after successful piratebox start/enable
I'm trying to summarize the problem solution now... please post, and follow this thread: [forum.piratebox.cc]
↧
Re: Alfa AWUS036NHR v2 - WLAN doesn't show up after successful piratebox start/enable
Alright! Thank you very much for the assistance.. I just re-flashed the SD Card using dd instead of the win32disk imager..
after start/enable I issued the systemctl status piratebox:
Then I issued a reboot and immediately unplugged the lan cable.
This time the raspberry pi showed immediate activity (the act led, flash drive led and the wireless adapter blinked)
The rest of the configuration was successful, tested the chat, file upload and forum - everything working for now.
But I realized that the usb flash drive seems to unused..
![]()
The date is odd and I couldn't find the uploaded file anywhere..
Also do I have the strange feeling that it won't start up, the next few times.. but I will test and report..
greetings apoc.
after start/enable I issued the systemctl status piratebox:
systemctl status piratebox
* piratebox.service - PirateBox Service
Loaded: loaded (/etc/systemd/system/piratebox.service; enabled)
Active: active (running) since Thu 2014-06-26 02:02:26 MDT; 29s ago
CGroup: /system.slice/piratebox.service
|-315 /usr/sbin/hostapd /opt/piratebox/conf/hostapd.conf
|-324 /usr/sbin/dnsmasq -x /var/run/piratebox_dnsmasq.pid -C /opt/piratebox/conf/dnsmasq_generated.conf
|-331 python /opt/piratebox/bin/droopy -H piratebox.lan -d /opt/piratebox/share/Shared -m -c 8080
`-341 /usr/sbin/lighttpd -f /opt/piratebox/conf/lighttpd/lighttpd.conf
Jun 26 02:02:24 alarmpi dnsmasq-dhcp[324]: DHCP, IP range 192.168.77.10 -- 192.168.77.250, lease time 12h
Jun 26 02:02:24 alarmpi dnsmasq[324]: read /opt/piratebox/conf/hosts_mesh - 0 addresses
Jun 26 02:02:24 alarmpi dnsmasq[324]: read /opt/piratebox/conf/hosts_generated - 1 addresses
Jun 26 02:02:24 alarmpi piratebox_alt[282]: 0
Jun 26 02:02:24 alarmpi piratebox_alt[282]: Starting droopy...
Jun 26 02:02:24 alarmpi piratebox_alt[282]: 0
Jun 26 02:02:25 alarmpi piratebox_alt[282]: Generated HTML-Shoutbox File.
Jun 26 02:02:25 alarmpi piratebox_alt[282]: Starting lighttpd...
Jun 26 02:02:25 alarmpi piratebox_alt[282]: 0
Jun 26 02:02:26 alarmpi systemd[1]: Started PirateBox Service.
Then I issued a reboot and immediately unplugged the lan cable.
This time the raspberry pi showed immediate activity (the act led, flash drive led and the wireless adapter blinked)
The rest of the configuration was successful, tested the chat, file upload and forum - everything working for now.
But I realized that the usb flash drive seems to unused..
df -h Filesystem Size Used Avail Use% Mounted on /dev/root 1.7G 713M 827M 47% / devtmpfs 84M 0 84M 0% /dev tmpfs 232M 0 232M 0% /dev/shm tmpfs 232M 308K 231M 1% /run tmpfs 232M 0 232M 0% /sys/fs/cgroup tmpfs 232M 0 232M 0% /tmp /dev/mmcblk0p1 90M 24M 66M 27% /boot tmpfs 47M 0 47M 0% /run/user/0
The date is odd and I couldn't find the uploaded file anywhere..
find / "filename.mkv"
Also do I have the strange feeling that it won't start up, the next few times.. but I will test and report..
greetings apoc.
↧
Re: Alfa AWUS036NHR v2 - WLAN doesn't show up after successful piratebox start/enable
Hi Apoc,
my personal opinion is, that it makes a difference if you do a warm-start or a cold-start.
Yes, the USB Stick/Drive is not automatically included to Piratebox... we still need a script, an automount config, or a clever howoto to help users to integrate it.
Matthias
my personal opinion is, that it makes a difference if you do a warm-start or a cold-start.
Yes, the USB Stick/Drive is not automatically included to Piratebox... we still need a script, an automount config, or a clever howoto to help users to integrate it.
Matthias
↧
Re: Solving the bootup issue
Dec 31 17:00:13 alarmpi piratebox_alt[117]: Starting hostap...
Dec 31 17:00:13 alarmpi piratebox_alt[117]: 0
Dec 31 17:00:13 alarmpi piratebox_alt[117]: Setting up wlan
Dec 31 17:00:13 alarmpi piratebox_alt[117]: Bringing up wifi interface wlan0
Dec 31 17:00:13 alarmpi piratebox_alt[117]: wlan0: ERROR while getting interface flags: No such device
Dec 31 17:00:14 alarmpi piratebox_alt[117]: ..failed
Dec 31 17:00:13 alarmpi systemd[1]: piratebox.service: control process exited, code=exited status=255
Dec 31 17:00:14 alarmpi piratebox_alt[117]: failed setting up Interface
Dec 31 17:00:14 alarmpi systemd[1]: Failed to start PirateBox Service.
Dec 31 17:00:14 alarmpi systemd[1]: Unit piratebox.service entered failed state.
Dec 31 17:00:13 alarmpi piratebox_alt[117]: 0
Dec 31 17:00:13 alarmpi piratebox_alt[117]: Setting up wlan
Dec 31 17:00:13 alarmpi piratebox_alt[117]: Bringing up wifi interface wlan0
Dec 31 17:00:13 alarmpi piratebox_alt[117]: wlan0: ERROR while getting interface flags: No such device
Dec 31 17:00:14 alarmpi piratebox_alt[117]: ..failed
Dec 31 17:00:13 alarmpi systemd[1]: piratebox.service: control process exited, code=exited status=255
Dec 31 17:00:14 alarmpi piratebox_alt[117]: failed setting up Interface
Dec 31 17:00:14 alarmpi systemd[1]: Failed to start PirateBox Service.
Dec 31 17:00:14 alarmpi systemd[1]: Unit piratebox.service entered failed state.
↧
↧
Kareha management
I just finished installing the PirateBox on my new Raspberry Pi and it works great. All components appear to have installed without issue. My question is, how do I manage the Kareha Forum posts? I started the RPI in a coffee shop and in about 20 mins the Forum was full of crap and porn and just kinda went nuts. How do I delete posts that do not belong to me? I am the administrator but I don't see an admin tab/tool/login. I have the "master" password for the board, but where would I use it?
↧
Re: Kareha management
Hi, see [wakaba.c3.cx]
hope that helps
Matthias
Quote
KarehaAdministration
link references edit close
Kareha has no separate interface for administrative tasks. To delete a post, click the "Manage" link, enter the AdminPassword, and the click the "Del" link next to a post. To delete or PermaSage a thread, click on the "All Threads" link in the thread list, and again click on the "Manage" link. "Delete" and "Permasage" links will appear in the thread list.
To see the IP address of a poster, you currently have to run the dumplog.pl script from a shell. This will hopefully change in the future.
If you want, you can also delete and move threads directly on the server, or even edit the thread HTML files, and then RebuildCaches.
hope that helps
Matthias
↧
Raspbian howto?
Hi there. I'm not much a fan of Arch and am more familiar with Debian. Has anyone written up a tutorial on getting Pirate Box 1.0 running under Raspbian? Thanks!
↧