Re: the chatbox does not work with piratebox 1.1.1.1
ok in this case I will reinstall the original and I will test even if it works with the base configuration. I just thought the configuration of the module css syntax change, it could come from the...
View ArticleRe: Raspbian Jessie Lite Piratebox
I ran into this same thing... on Jessie you have run: sudo systemctl disable lighttpd sudo systemctl disable dnsmasq They should no longer start at boot.
View ArticleRe: Files page redirect after changing to usb
Hi, I'm having the exact same problem described but a hard reload doesn't fix the problem. Any ideas on what I should do? Thanks
View ArticleRe: Files page redirect after changing to usb
Try to remove the cache of your browser. And do you see the (changed) website in a other browser?
View ArticleRe: RPi3 box troubleshooting
I think the issue of whether you can use the built-in wifi adapter in the RP3 should be in the FAQ as it would save a lot of time for first time Pirate Box users. I also have the use of a better...
View ArticleRe: Files page redirect after changing to usb
Well whaddya know, after reflashing the image it works, but only on my phone. Thanks, I'll try clearing the cache on my computer.
View ArticleRe: Putting files into folders according to type
Huh, that sounds really interesting. Bumping to see if anyone has any solutions
View ArticleRe: RPi3 box troubleshooting
About the wifi issue: - I added it to my public documentation todo list. About the streaming: It depends on the quality of your video you are streaming. I do not know about performance meassurements,...
View ArticleRe: the chatbox does not work with piratebox 1.1.1.1
Hello Mathias actually the chat box has been disabled in error in my configuration changes to enabled admin mod. I reinstall everything behind and it works thank you again for your response john
View ArticleRe: Pirate PI3 - 32gb SD card with 26gb mounted for storage = success
Since I was using a pi zero, I didn't want to plug anything into the micro usb port except for the OTG cable and the edimax ew-7722utn v2 wifi adpater (which worked out of the box). If I had used a...
View ArticleRaspberry Pi 3 and built in Wifi - Boot Issue
Hi All, I am a newbie to Raspberry Pi . I have Pirate box installed on Tp Link 3020 and it works like a charm. I have bought a Raspberry Pi 3 to try out the same. In the DIY USB Wi-Fi Adapter is added...
View ArticleCan't ssh into pi zero piratebox?
Hi, I'm new to piratebox so please forgive me if I'm doing something stupid, but I'm struggling to get in via ssh. I have a Pi Zero with a Zero4U 4-port USB hub piggy-backed on so I can plug in my...
View ArticleRe: Can't ssh into pi zero piratebox?
Hi, as you can see the PirateBox wifi, did you consider using the open wifi instead of a connection via ethernet? Matthias
View ArticleRe: Can't ssh into pi zero piratebox?
Hi Matthias, well, I do feel a fool now. No, I hadn't thought of that, I was thinking it had to be a wired ethernet connection for the ssh part. Having now connected my computer to the wifi instead, I...
View ArticleRe: PirateBox 1.0.7 - RPi / RPi2 / RPi3 / RPi Zero
Good afternoon, I would like to try this. Just a question, me having a Raspberry PI3. Since the pi3 comes with built-in wifi, I will need to get the USB Wi-Fi Adapter any way ? Or will work with the...
View ArticleRe: Raspberry Pi 3 and built in Wifi - Boot Issue
Hello, the DIY mentions a USB adapter for Wi-Fi as the RPi 1 for example didn't have an on-board adapter. I do not have an RPi3, but after a quick search I think the BCM43438 chip can operate in AP...
View ArticleRe: PirateBox 1.0.7 - RPi / RPi2 / RPi3 / RPi Zero
Hi, Yes you can use the builtin wifi adapter. Best regards Matthias
View ArticleRe: Ubiquiti NanoStation + Pi(rate) Box - has anyone tested this?
I'm planning to do this, but with a twist... Piratebox can be modified to use any access point when you load it on a raspberry pi. So my plan is to run a pi and ubiquity router off a solar...
View ArticleRe: Raspberry Pi 3 and built in Wifi - Boot Issue
Hi Nargren, Sorry for my late reply . There was some issue with the image that i had downloaded. After cribbing over it i decided to freshly download an image and tried running on it and it worked !!!...
View Article