Hi!
First of all, thank you for this tool :).
Then, my hardware: R-Pi B, Wi-Pi as wifi dongle, a FAT32 usb Key (1Go, was not here when I had my problem), SD card Samsung 16Go. Image from: [downloads.piratebox.de] (which need to be rename as a .img on windows, because no file extension).
I think my problem was the USB stick, I plugged a new one, then removed the init_done (I found it by using find / -name "init_done" -print), which was not as you said on the other thread on my usb stick, but in board folder (you said it also anyway ^^). Then I ran the install script again, /opt/piratebox/bin/install_piratebox.sh /opt/piratebox/conf/piratebox.conf imageboard and it works fine. I don't know which are the differences between raspirate and general piratebox, and you should be able to understand if there is a problem better than me :p.
One more point, my SD card 16Go became 100 Mo, as Windows warmed me and checked by the df command once on the Pi :(.
So I used the way there: [davidnelson.me] to grow it, directly from the Pi without any problem, as the df command shows me a root partition a ~14Go now.
But, strangely there is still nothing on the USB key. I am guessing it's only used for the install step by default? Can't find the sda1 neither, but usb-devices seems to show an usb storage, so I am lost on this one. Maybe (it is an anon usb key) it is incompatible with the Pi, but still can help for the install step?
Oh, and rocketman, if you are as enthusiast as me, you might want to customize a little bit the pirate box! Little trick I found, because none of the mount/unmount solution I read fits me, use mv, cp and this kind of stuff to put the files you want to edit in the Shared folder (or upload picture from your personal computer to the box there if you want to add it to the html pages). Then mv and a little bit of chown/chgrp, and your new image works fine in the index.html for example.
P.S : sorry in advance for my mistakes, as a French my English can be hard sometimes x)
First of all, thank you for this tool :).
Then, my hardware: R-Pi B, Wi-Pi as wifi dongle, a FAT32 usb Key (1Go, was not here when I had my problem), SD card Samsung 16Go. Image from: [downloads.piratebox.de] (which need to be rename as a .img on windows, because no file extension).
I think my problem was the USB stick, I plugged a new one, then removed the init_done (I found it by using find / -name "init_done" -print), which was not as you said on the other thread on my usb stick, but in board folder (you said it also anyway ^^). Then I ran the install script again, /opt/piratebox/bin/install_piratebox.sh /opt/piratebox/conf/piratebox.conf imageboard and it works fine. I don't know which are the differences between raspirate and general piratebox, and you should be able to understand if there is a problem better than me :p.
One more point, my SD card 16Go became 100 Mo, as Windows warmed me and checked by the df command once on the Pi :(.
So I used the way there: [davidnelson.me] to grow it, directly from the Pi without any problem, as the df command shows me a root partition a ~14Go now.
But, strangely there is still nothing on the USB key. I am guessing it's only used for the install step by default? Can't find the sda1 neither, but usb-devices seems to show an usb storage, so I am lost on this one. Maybe (it is an anon usb key) it is incompatible with the Pi, but still can help for the install step?
Oh, and rocketman, if you are as enthusiast as me, you might want to customize a little bit the pirate box! Little trick I found, because none of the mount/unmount solution I read fits me, use mv, cp and this kind of stuff to put the files you want to edit in the Shared folder (or upload picture from your personal computer to the box there if you want to add it to the html pages). Then mv and a little bit of chown/chgrp, and your new image works fine in the index.html for example.
P.S : sorry in advance for my mistakes, as a French my English can be hard sometimes x)