Re: WiFi Issues. Rasp Pi Model B

Hi Tobias. lsusb:
Bus 001 Device 007: ID 03f0:5307 Hewlett-Packard (pendrive)
Bus 001 Device 006: ID 2001:330d Dlink- Corp. Wireless N Nano USB Adapter
Bus 001 Device 005: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 004: ID 413c:2107 Dell Computer Corp. (keyboard)
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC 9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ifconfig:
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255
ether b8:27:eb:77:20:17 txqueuelen 1000 (Ethernet)
RX packets 519 bytes 94705 (92.4 KiB)
RX errors 0 dropped 10 overruns 0 frame 0
TX packets 183 bytes 41047 (40.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.77.1 netmask 255.255.255.0 broadcast 192.168.77.255
ether 9c:d6:43:88:af:e7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

That is! There is also a TL-MR3020 connected at the ethernet socket. Without this I can not conect with Raspbian Pi.

Regards, Ribeiroz