Matthias Wrote:
-------------------------------------------------------
> HI,
> in this case run the following command exactly,
> after that the PirateBox init.d script waits until
> the USB-Wifi is ready:
>
> sed -i
> 's|PROBE_INTERFACE="no"|PROBE_INTERFACE="yes"|g'
> /opt/piratebox/conf/piratebox.conf
>
>
> Then the next reboot it should work.
>
> About the usage of an external drive: We still
> need a very easy howto to make this working.
> Sorry, we are not done with the todo list.
>
>
> Matthias
I tried that and the Raspberry Still does not start the WiFi the Light is still solid but doesn't flash like when I start it through Putty
Thanks for the reply and sorry for my late responce.
Thanks Cretten
-------------------------------------------------------
> HI,
> in this case run the following command exactly,
> after that the PirateBox init.d script waits until
> the USB-Wifi is ready:
>
> sed -i
> 's|PROBE_INTERFACE="no"|PROBE_INTERFACE="yes"|g'
> /opt/piratebox/conf/piratebox.conf
>
>
> Then the next reboot it should work.
>
> About the usage of an external drive: We still
> need a very easy howto to make this working.
> Sorry, we are not done with the todo list.
>
>
> Matthias
I tried that and the Raspberry Still does not start the WiFi the Light is still solid but doesn't flash like when I start it through Putty
Thanks for the reply and sorry for my late responce.
Thanks Cretten