Hi all
Need some help.
I've installed the Archlinux to the sd card. Once I do the remove Ethernet cable and power it down then on again the WiFi will not start so my thinking is PirateBox isnt starting itself up. I did the command “systemctl enable piratebox”
Also I can never get the HDD or flash drive to work. I'm not to familiar with Linux but was able to follow the guide.
Any help would be great.
Thanks Cretten
Raspberry PI
Edimax - EW-7711UAn
Buffalo 1TB HD-CE.10TU2 EU external powered HDD
Buffalo RUF2-R8C 8gb flash drive
No name brand 2gb flash drive
Need some help.
I've installed the Archlinux to the sd card. Once I do the remove Ethernet cable and power it down then on again the WiFi will not start so my thinking is PirateBox isnt starting itself up. I did the command “systemctl enable piratebox”
Also I can never get the HDD or flash drive to work. I'm not to familiar with Linux but was able to follow the guide.
Any help would be great.
Thanks Cretten
Raspberry PI
Edimax - EW-7711UAn
Buffalo 1TB HD-CE.10TU2 EU external powered HDD
Buffalo RUF2-R8C 8gb flash drive
No name brand 2gb flash drive