No, everything is ok. Your home network is in the 10.0.1.x range. You will get a 192.168.77.1 address when you connect your computer to the PirateBox wifi network. The howto starts from the point, where you start working based on your home network, where you need to find the RPi's IP.Quote
For some reason the IP address assigned to it was completely different than the 192.168.77.1 address in the documentation... not sure why. It assigned something like 10.0.1.37 I think? I was only able to find the PI's IP by logging in as alarm and typing
Quote
and it gave me some message about UUID, like it thought there was 2 USB drives plugged in or something. How do you tell it which one to use?
Was it this message:
?Quote
You seem to have more than one valid ${FS} partition for a USB share:
"${UUIDS}\n"
Please make sure you have a USB thumb drive attached with a single ${FS} partition.
Do you see one partition on Windows/Mac? Unfortunately you can not tell the script which partition to be used. So if you see only one partition on the other computer, the new USB stick is configured in GPT mode, which might be reconfigured as old MBR mode... But before writing any instruction, I wait for your feedback.
best regards Matthias