Hello everyone,
Sorry if this topic has popped up before but I did not find any answer to solve my problem...
I have decided to make a Piratebox based on a Raspberry Pi 3. I followed the guidelines etc. and got it to work. I have a 32Go SDCard that I plugged in the Raspberry and which hosts both the Piratebox software and the data.
Everything is fine BUT one thing is still not solved. When I upload files through the piratebox.lan platform and I can't access those files through my computer to delete them. I mean that if I remove the SDCard and plug in into my computer (Mac) I don't have any folder with files in it... I just have the files related to the piratebox software (bcm, fixup, start...).
I did activate the following command : sudo /opt/piratebox/rpi/bin/sdcard_share.sh It is as if I can only read the partition with the software instead of the larger partition which contains the data...
So for the moment I can upload stuff on the card but I can't remove anything...
Any help would be greatly appreciated.
![]()
Sorry if this topic has popped up before but I did not find any answer to solve my problem...
I have decided to make a Piratebox based on a Raspberry Pi 3. I followed the guidelines etc. and got it to work. I have a 32Go SDCard that I plugged in the Raspberry and which hosts both the Piratebox software and the data.
Everything is fine BUT one thing is still not solved. When I upload files through the piratebox.lan platform and I can't access those files through my computer to delete them. I mean that if I remove the SDCard and plug in into my computer (Mac) I don't have any folder with files in it... I just have the files related to the piratebox software (bcm, fixup, start...).
I did activate the following command : sudo /opt/piratebox/rpi/bin/sdcard_share.sh It is as if I can only read the partition with the software instead of the larger partition which contains the data...
So for the moment I can upload stuff on the card but I can't remove anything...
Any help would be greatly appreciated.
