OK, here is my feedback after testing the posted RPI_1 image:
All the steps on the checklist were followed and there were only 3 identified problems and 1 out of date set of instructions that i have found with the image and associated processes:
All in all, a great image with the only issues being the ones i highlighted above :)
All the steps on the checklist were followed and there were only 3 identified problems and 1 out of date set of instructions that i have found with the image and associated processes:
- [*] Even after having setup the image board, the piratebox would still direct me to the The kareha image board is not fully configured.
Visit the following Link to do the initial configuration.
Or go back to Pirate Box start page.
Clicking on the visit the following link would make the board come up but to someone who was inexperienced with piratebox it would confuse them
[*] In the MOTD, it refers to the setup of minidlna, this item was not on the checklist to test, but i tested it anyway and found that the second command wouldn't run Failed to execute operation: The name org.freedesktop.PolicyKit1 was not provided by any .service files
[*] Im not sure how the disk usage figure works but when i performed the USB mod it stayed at the 62% usage that it was at before i changed the file location. A 16gb USB with a 50kb PDF is not 62% full!
[*]The out of date instructions i refer to are those for Mounting a USB drive; It is now necessary to run the sudo command infront of each of the commands listed for this process.
All in all, a great image with the only issues being the ones i highlighted above :)